Gfb STi 6 speed short shift kit upgrade (part 4202) Manual de usuario descargar pdf

Instructions for GFB STi 6 speed short shift kit upgrade (part # 4202)

This kit is intended for use only in conjunction with GFB’s STi 6-speed basic shift kit (part # 4003), which

is assumed to have already been installed before fitting this upgrade kit.

This 4202 upgrade kit allows your existing GFB 4003 shifter to be adjusted to even shorter throw settings

than is possible with the 4003 kit alone, and these two kits combined.

Included in kit:

• 2 x side plates

• 1 x linkage knuckle, including:

2 x M4 x 12 socket screws

• 2 x M8 washers

• 2 x M8 x 16 button head screws & nuts

• 2 x M5 x 8 button head screws

• 1 x 3mm hex key

• 1 x 5mm hex key

Required tools:

• 2 x 12mm spanner/wrench

• Medium flat-blade and phillips screwdriver

We HIGHLY recommend you read through the instructions and familiarise yourself with the steps

before starting installation of this product.

1. Lift the lid of the centre console between the seats above the

handbrake. On the plastic handbrake shroud there are two

slots, using the flat-blade screwdriver padded with a rag,

carefully lever the shroud up on each side (there is a pop-

type fastener on each side).

2. Lift the handbrake shroud out (taking care of wiring still

attached), to give you access to the gearstick surround

(figure 2).

3. Unscrew the gear knob and unclip the button fastener on the

leather shift boot. Gently lift the plastic gearstick shroud up

from the back, it is only lightly clipped in and does not need

much force.

1 2

Pagina 1

Instructions for GFB STi 6 speed short shift kit upgrade (part # 4202) This kit is intended for use only in conjunction with GFB’s STi 6-speed basic

4. Remove the linkage bolt that joins the gearstick to the shift linkage, and let the gearstick rest towards the back of the car out of the way for

Sin comentarios

Gfb STi 6 speed short shift kit upgrade (part 4202) Manual de usuario